We can supply a wide range of tools for cutting and trimming of GRP.
We stock and supply a range of diamond tipped cutting tools which have been proven over 25 years to be the best and most economical tools for cutting glassfibre reinforced mouldings. Our diamond tipped tools are of the highest quality and will give the longest life whilst remaining economically priced. All our diamond tools are produced using natural diamond electroplated onto top quality steel.
Diamond holesaws, burrs and drills are produced using 40 - 50 grit diamond only, our diamond wheels are supplied as either 40/50 or 50/60 grit. The finer grit 50/60 gives a cleaner cut, the coarser grit 40/50 will cut faster, but may tend to chip the gelcoat slightly.
The illustrated tools represent our standard range, but we are always prepared to make special types and sizes to a customer's drawing, sketch or specification.
Diamond tipped tools of any type made to order to customer's drawings.
For cutting and machining GRP diamond tools are unbeatable, they have long life and are cool cutting, and usually cutting can be carried out dry.
Should the diamond grit become loaded with resin through cutting material which is not fully cured, soaking in resin solvent (acetone) and brushing with a wire brush will restore the cutting surface. |
|
