title02 downlandLogoSS


Wheel Arbor


The wheel arbor is a holding device to enable small diameter wheels to be fitted to a router or drill with a 3-jaw or collet chuck. The wheel arbor is available with Hther 14" or 6mm shank and is intended for use with a 2" x 3/4" x 0.060 (50 x 19 x 1.6mm) wheel.
Please note that safety glasses and gloves should always be worn when using unguarded wheels.

Order Ref          Description
POOO 1701       Wheel Arbor with 1/4” shank
POOO 5717       Wheel Arbor with 6mm shank

To obtain more information about this product please visit the Information page or click HERE