TankDrumHeaters


									Back

	*Tank and Drum Heaters*

		The IBC Heating Jackets and Drum Heating Jackets are not suitable for hazardous Zone 1 and Zone 2 areas. For resin heating in hazardous areas we recommend the Thermosafe Heater

	*IBC Tank Heater* *Order ref: AAO 16476*



			To achieve the correct viscosity and therefore best handling characteristics of polyester resin it should be warmed to a temperature of 20-25°C. The IBC heating jacket is a polyurethane coated nylon outer jacket fitted with adjustable retaining straps and quick release polyurethane clips. A high thermal efficiency layer of insulation is held in place between the outer cover and the inner element carrier.

				Specifications

Jacket material	Nylon base fabric. Hydrolysis resistant, polyurethane coated polyamide substrate with fluorocarbon finish
Jacket dimension	950mm height Adjustable between 4160-431Omm on circumference
Control	Adjustable thermostat -5 to 40°C
Power cable	5 metres, 2 x 1mm, PVC insulated, sheathed, galvanized steel wire braided
Electrical insulation	Double insulated
Voltage	Standard 240v, 2 x 1 kw circuits


	*Drum Heating Jacket* *Order ref: AAO 16475*



		The heating jacket is adjustable and suitable for plastic and steel 200L drums

			Specifications

Jacket material	Nylon base fabric. Hydrolysis resistant, polyurethane coated polyamide substrate with fluorocarbon finish
Jacket dimension	440mm height x 1800-1950mm on circumference
Control	Adjustable or fixed temprature thermostat
Power cable	5 metres, 2 x 1mm, PVC insulated, sheathed, galvanized steel wire braided
Electrical insulation	Double insulated
Voltage	Standard 240v, 450 watts

Thermosafe Drum Heater

Order ref: AAO 16479


	The Thermosafe Drumheater is versatile, simple, efficient, economical and totally safe even in resin storage and processing areas. It operates on the induction heating method and has been specifically designed for use in potentially explosive atmospheres. The Thermosafe produces uniform heating of drum walls and will raise the temperature of a typical 230kg drum of laminating resin from 10°C to 25°C in approximately 1 hour.

		Specifications

Overall diameter	74.3cm (29 1/4”)
Height	71.7cm (28”)
Weight	43.0kg (95lb)
Electrical Supply
Single phase 240 volts, 50Hz AC
Class II Appliance. DO NOT EARTH.
BASEEFA Certication No. Ex 86B3044X.
EEx ll 170°C(T3). (Zones 1 &2)


	To obtain more information about these products please visit the Information page or click *HERE*